Residential Archives - شرکت الین اریکه http://elinarike.com/main تامین کننده DGS, PUMP, mechanical seal Fri, 07 Feb 2020 08:43:45 +0000 en-GB hourly 1 https://wordpress.org/?v=5.9.11 http://elinarike.com/main/wp-content/uploads/2019/12/cropped-Annotation-2019-11-28-132145-32x32.png Residential Archives - شرکت الین اریکه http://elinarike.com/main 32 32 VGM961O http://elinarike.com/main/en/portfolio-items/vgm961o/ http://elinarike.com/main/en/portfolio-items/vgm961o/#respond Tue, 31 Dec 2019 11:07:14 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1656 VGM961O DOWNLOAD PDF Item No. Description 1.1 Seal Face with bellows Unit 1.2 O-Ring 1.3 Set screw 2 Seat (G9) 3 O-Ring Suitable for high temperature application No dynamically loaded O-Ring Pumping screw for media with higher viscosity also available Short installation length possible Rugged design

The post VGM961O appeared first on شرکت الین اریکه.

]]>

VGM961O

  • VGM961O
  • VGM961O
DOWNLOAD PDF
Item No. Description
1.1 Seal Face with bellows Unit
1.2 O-Ring
1.3 Set screw
2 Seat (G9)
3 O-Ring
  • Suitable for high temperature
    application
  • No dynamically loaded O-Ring
  • Pumping screw for media with higher
    viscosity also available
  • Short installation length possible
  • Rugged design for long operating life
  • Bellows design efficiently ensure
    self-cleaning
  • Chemical industry
  • Cold media
  • Highly viscous media
  • Hot media
  • Power plant technology
  • Refining technology
  • EN 12756
  • Seal face: Carbon graphite antimony impregnated (A), Silicon carbide (Q12)
  • Seat: Silicon carbide (Q1)
  • Bellows: Inconel® 718 hardened (M6),
    Hastelloy® C-276 (M5)
  • Metal parts: CrNiMo steel (G), Duplex (G1),
    Hastelloy® C-4 (M)
  • Sizes: d1 = Upto 100 mm (Upto 4.000’’)
  • Externally pressurized:
    p1 = … 25 bar (363 PSI)
  • Internally pressurized:
    p1 <120 °C (248 °F) 10 bar (145 PSI)
    p1 <220 °C (428 °F) 5 bar (72 PSI)
  • Temperature: t= -40°C…+220°C (-40°F…+428°F)
  • Stationary seat lock necessary.
  • Speed = 20 m/s (66 ft/s)
  • Single seal configuration
  • Balanced design
  • Independent of direction of rotation
  • For plain shafts
  • Rotary metal bellows design

The post VGM961O appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/vgm961o/feed/ 0 RGT3111 – QUENCH FLUID SYSTEMS http://elinarike.com/main/en/portfolio-items/rgt3111/ http://elinarike.com/main/en/portfolio-items/rgt3111/#respond Sun, 29 Dec 2019 20:02:51 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1771 RGT3111 - QUENCH FLUID SYSTEMS DOWNLOAD PDF Item No. Description 1 Storage tank (capacity 3L) 2 Inlet filter with vented cap 3 Sight-glass or level switch 4 Name plate 5 Overflow G 1/8 Designed for varied applications due to construction in stainless steel with borosilicate sight-glasses

The post RGT3111 – QUENCH FLUID SYSTEMS appeared first on شرکت الین اریکه.

]]>

RGT3111 – QUENCH FLUID SYSTEMS

  • RGT3111
  • RGT3111
  • RGT3111
DOWNLOAD PDF
Item No. Description
1 Storage tank (capacity 3L)
2 Inlet filter with vented cap
3 Sight-glass or level switch
4 Name plate
5 Overflow G 1/8
  • Designed for varied applications due to
    construction in stainless steel with
    borosilicate sight-glasses suitable for
    highly corrosive media
  • Reliability in operation due to the design of
    combined filling and ventilation filter in the
    hand refill pump
  • Construction design for operating
    pressure up to 200 °C
  • Discharge of leakage is achieved due to
    integrated overflow design
  • To monitor the fluid volume a level switch
    can be installed instead of sight glass
  • Quench fluid systems are employed:
    • To absorb leakage
    • To monitor the leakage rate (e.g. through
      periodic reading of the level in the tank)
    • To lubricate and to cool the outboard
      mechanical seal in a tandem arrangement
    • To prevent icing
    • To protect against dry running
    • To stabilize the lubricating film
    • To exclude air from the media in order to prevent a reaction with oxygen in the air
  • Chemical industry
  • Petrochemical industry
  • Oil and gas industry
  • Refining technology
  • Pulp and paper industry
  • Food and beverage industry
  • Install the quench fluid tank approx. 1 … 2 m (3.3
    … 6.6 ft) above the mechanical seal. Install
    connection pipes to the mechanical seal with low
    flow resistance. Pipes must vent automatically in
    the direction of the tank. It is imperative that air
    pockets are prevented. The minimum filling level
    must always be above the connection socket at
    the side (in the case of the thermosiphon
    principle).
  • Quench fluid systems can be operated in two
    different modes:
  • Dead-end quench (Plan 51):
    Quench fluid from an elevated tank. The
    characteristic feature of this principle is that no
    heat is dissipated by the system.
  • Circulation (Plan 52):
    Quench fluid from an elevated tank; external tank,
    pressureless; thermosiphon or forced circulation.
    In this case heat is dissipated by the circulation.
    Cooling capacity by convection is minimal,
    however.
  • Circulation in accordance with API 682 / ISO
    21049: Plan 51, Plan 52
  • Quench fluid supply system is employed for
    applications in sealing systems with a wide
    variety of operating parameters for supplying
    quench fluid to double and tandem mechanical
    seals. They act as a convenient fluid reservoir.
    The exchange of fluid takes place by the
    thermosiphon principle or by forced circulation,
    for example with a pumping screw. The
    QFS2000 stainless steel tank is equipped with
    sight-glasses for monitoring the MIN/MAX level
    and can be fastened with a lug fixture. The
    leakage overflow can be selectively discharged.

The post RGT3111 – QUENCH FLUID SYSTEMS appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/rgt3111/feed/ 0 ISQ – HAND REFILL PUMPS http://elinarike.com/main/en/portfolio-items/isq/ http://elinarike.com/main/en/portfolio-items/isq/#respond Sun, 29 Dec 2019 19:54:19 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1768 ISQ - HAND REFILL PUMPS DOWNLOAD PDF For efficient processes, with a choice of 2 basic types For manual refilling of buffer fluid units during operation Designed for varied applications due to construction in stainless steel with borosilicate sight-glasses suitable for highly corrosive media Reliability in operation due

The post ISQ – HAND REFILL PUMPS appeared first on شرکت الین اریکه.

]]>

ISQ – HAND REFILL PUMPS

  • ISQ
DOWNLOAD PDF
  • For efficient processes, with a choice of 2 basic
    types
  • For manual refilling of buffer fluid units during
    operation
  • Designed for varied applications due to
    construction in stainless steel with borosilicate
    sight-glasses suitable for highly corrosive media
  • Reliability in operation due to the design of
    combined filling and ventilation filter in the hand
    refill pump
  • Two sight-glasses for reading the MIN/MAX fluid
    level
  • The hand refill pump is designed for manual
    refilling during operation in case of buffer fluid
    losses.
  • Chemical industry
  • Petrochemical industry
  • Oil and gas industry
  • Refining technology
  • Pulp and paper industry
  • Food and beverage industry
  • The hand refill pump consists of a storage
    vessel with level indicator, filling filter and a
    hand pump with integrated check valve. It
    is mounted directly on the thermosiphon
    vessel or the pressure booster.

The post ISQ – HAND REFILL PUMPS appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/isq/feed/ 0 DT – CYCLONE SEPARATORS http://elinarike.com/main/en/portfolio-items/dt/ http://elinarike.com/main/en/portfolio-items/dt/#respond Sun, 29 Dec 2019 18:44:19 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1763 DT - CYCLONE SEPARATORS DOWNLOAD PDF Item No. Description 1 Housing 2 Cover 3 Insert 4 O-Ring Construction design for operating pressure up to 200 bar Hassle free maintenance is achieved in operation with high reliability, because the dirt is automatically conveyed to the suction nozzle

The post DT – CYCLONE SEPARATORS appeared first on شرکت الین اریکه.

]]>

DT – CYCLONE SEPARATORS

  • DT
  • DT
  • DT
DOWNLOAD PDF
Item No. Description
1 Housing
2 Cover
3 Insert
4 O-Ring
  • Construction design for operating
    pressure up to 200 bar
  • Hassle free maintenance is achieved in
    operation with high reliability, because
    the dirt is automatically conveyed to the
    suction nozzle of the pump
  • High filtration efficiency
  • Compact design is achieved because
    of low space requirement, in addition to
    the option of block-type design with
    integrated flange connections
  • Design allows for varied applications
    due to construction in stainless steel
    with replaceable insert made of ceramic
  • The cyclone separator must always be installed in the
    vertical position. The pressure at the outlets (C) and (B)
    must be lower than at the inlet (A). Cleaned liquid is
    conveyed to the top (B) and the separated dirt to the
    suction port of the pump.
  • Chemical industry
  • Oil and gas industry
  • Petrochemical industry
  • Refining technology
  • Water and waste water technology
  • Circulation in accordance with API 682 /
    ISO 21049: Plan 31, Plan 41
  • The CS range is available in varied
    versions i.e. cyclone separator with
    replaceable insert made of ceramic or cast
    version of the cyclone separator or
    cyclone separator for high flow rates and
    high pressures.

The post DT – CYCLONE SEPARATORS appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/dt/feed/ 0 NG – MAGNETIC FILTERS http://elinarike.com/main/en/portfolio-items/ng/ http://elinarike.com/main/en/portfolio-items/ng/#respond Sun, 29 Dec 2019 18:37:15 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1759 NG - MAGNETIC FILTERS DOWNLOAD PDF Item No. Description 1 Filter cover 2 Filter barrel 3 Element insert 3a Internal mesh 6 Ring magnet 13 Venting screw All the parts exposed to pressure are constructed from forged material Combination device: magnetic filter and filter element Hassle

The post NG – MAGNETIC FILTERS appeared first on شرکت الین اریکه.

]]>

NG – MAGNETIC FILTERS

  • NG
  • NG
DOWNLOAD PDF
Item No. Description
1 Filter cover
2 Filter barrel
3 Element insert
3a Internal mesh
6 Ring magnet
13 Venting screw
  • All the parts exposed to pressure are
    constructed from forged material
  • Combination device:
    magnetic filter and
    filter element
  • Hassle free maintenance of simple and
    quick cleaning is achieved in operation
    as the housing can be dismantled
  • Protection of filter elements from
    reverse current is achieved due to the
    provision of internal mesh
  • Venting screws in the filter inlet and
    outlet can be employed as connections
    for maintenance or for indicating
    differential pressure
  • The magnetic rod is positioned in the filter in such
    a way that it catches magnetic particles flowing
    past in the medium on all sides. Partial coarse
    filtration is provided by the incorporated filter
    element.
  • Chemical industry
  • Oil and gas industry
  • Petrochemical industry
  • Power plant technology
  • Refining technology
  • MF filters are inline filters for installation
    inside pipelines and are employed in seal
    supply systems and any other such
    systems in which the media has to be
    cleaned of magnetic and non-magnetic
    impurities up to a certain size. High level of
    efficiency is guaranteed because of the
    combination of magnetic rod and filter
    element

The post NG – MAGNETIC FILTERS appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/ng/feed/ 0 IFL – HEAT EXCHANGERS http://elinarike.com/main/en/portfolio-items/ifl/ http://elinarike.com/main/en/portfolio-items/ifl/#respond Sun, 29 Dec 2019 18:21:31 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1750 IFL - HEAT EXCHANGERS DOWNLOAD PDF Cooling capacity up to 10.5kW Cost effective solution Effective cooling achieved with wound double helix around a guide tube Designed for varied applications due to construction in stainless steel For optimum and simple cleaning, the heat exchanger can be dismantled Chemical

The post IFL – HEAT EXCHANGERS appeared first on شرکت الین اریکه.

]]>

IFL – HEAT EXCHANGERS

  • IFL
  • IFL
  • IFL
DOWNLOAD PDF
  • Cooling capacity up to 10.5kW
  • Cost effective solution
  • Effective cooling achieved with wound
    double helix around a guide tube
  • Designed for varied applications due
    to construction in stainless steel
  • For optimum and simple cleaning, the
    heat exchanger can be dismantled
  • Chemical industry
  • Petrochemical industry
  • Power plant technology
  • Refining technology
  • Oil and gas industry
  • PED 2014/68/EU (Design and production in
    accordance with EU Pressure Equipment Directive)
  • Mount vertically with connections pointing up.
    Provide for external venting on the process/barrier
    medium side (the user has to install a vent at the
    highest point of the pipe work).
  • Cleaning:
    Cooling water side: the area around the tubes can be
    cleaned mechanically after the housing is removed.
  • Process/barrier medium side: flush with a suitable
    solvent.
  • Circulation in accordance with API 682 /
    ISO 21049: Plan 21, Plan 22, Plan 23,
    Plan 41
  • HEK designed heat exchanger is
    employed to cool process/barrier fluids in
    seal supply systems. The heat exchanger
    has a wound double helix around the
    guide tube, the process/barrier medium is
    directed through the shell of the HEK and
    the cooling medium through the tubes

The post IFL – HEAT EXCHANGERS appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/ifl/feed/ 0 IF – HEAT EXCHANGERS http://elinarike.com/main/en/portfolio-items/if/ http://elinarike.com/main/en/portfolio-items/if/#respond Sun, 29 Dec 2019 18:15:15 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1746 IF - HEAT EXCHANGERS DOWNLOAD PDF Construction design for operating pressure up to 45 bar / 260°C (tube side) Design allows for varied applications due to construction in stainless steel For optimum and simple cleaning of the tubes, the heat exchanger can be dismantled Complete venting and draining

The post IF – HEAT EXCHANGERS appeared first on شرکت الین اریکه.

]]>

IF – HEAT EXCHANGERS

  • IF
  • IF
DOWNLOAD PDF
  • Construction design for operating
    pressure up to 45 bar / 260°C (tube
    side)
  • Design allows for varied applications
    due to construction in stainless steel
  • For optimum and simple cleaning of the
    tubes, the heat exchanger can be
    dismantled
  • Complete venting and draining of the
    cooling water side and process can be
    achieved
  • Chemical industry
  • Oil and gas industry
  • Petrochemical industry
  • Refining technology
  • Cleaning:
    Cooling water side: the area around the tubes
    can be cleaned mechanically after the housing is
    removed.
  • Process/barrier medium side: flush with a suitable solvent.
  • Circulation in accordance with API 682 / ISO
    21049: Plan 21, Plan 22, Plan 23, Plan 41
  • HE designed heat exchanger is used to cool
    process/barrier fluids in seal supply systems.
  • HE heat exchanger is available in standard
    construction and conforms to API 682
    standards.
  • The process/barrier medium is directed
    through the tube and the cooling medium
    through the shell. For simple draining or
    venting on the side of the cooling water, the
    heat exchanger can also be supplied with
    ventilation/drainage ball valves. Temperature
    instruments can also be fitted in the supply line
    of the mechanical seals.

The post IF – HEAT EXCHANGERS appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/if/feed/ 0 IFE- HEAT EXCHANGERS http://elinarike.com/main/en/portfolio-items/ife/ http://elinarike.com/main/en/portfolio-items/ife/#respond Sun, 29 Dec 2019 16:45:01 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1741 IFE- HEAT EXCHANGERS DOWNLOAD PDF Item No. Description N1 Cooling water IN N2 Cooling water OUT N3 Process/barrier medium IN N4 Process/barrier medium OUT N5 Cooling circuit vent N6 Cooling water drain N7/N8 Process/barrier circuit vent Cooling capacity up to 36 kW Installation can be done

The post IFE- HEAT EXCHANGERS appeared first on شرکت الین اریکه.

]]>

IFE- HEAT EXCHANGERS

  • IFE
  • IFE
DOWNLOAD PDF
Item No. Description
N1 Cooling water IN
N2 Cooling water OUT
N3 Process/barrier medium IN
N4 Process/barrier medium OUT
N5 Cooling circuit vent
N6 Cooling water drain
N7/N8 Process/barrier circuit vent
  • Cooling capacity up to 36 kW
  • Installation can be done either in a
    vertical or a horizontal position
  • For optimum and simple cleaning, the
    heat exchanger can be dismantled
  • Compact design of tubular heat
    exchanger with integrated guide
    plates alongwith extremely efficient
    cooling capacity
  • Designed for varied applications due
    to construction in stainless steel
    allows flush with a suitable solvent on
    the process/barrier medium side
  • Chemical industry
  • Oil and gas industry
  • Petrochemical industry
  • Power plant technology
  • Refining technology
  • PED 2014/68/EU (Design and production in
    accordance with EU Pressure Equipment
    Directive)
    ASME VIII, Div. 1 (Design, calculation and
    production)
  • Cleaning:
  • Cooling water side: the area around the tubes can
    be cleaned mechanically after the housing is
    removed.
  • Process/barrier medium side: flush with a suitable
    solvent.
  • Circulation in accordance with API 682 /
    ISO 21049: Plan 21, Plan 22, Plan 23,
    Plan 41
  • HED designed heat exchanger is
    employed to cool process/barrier fluids in
    seal supply systems.
  • Construction of the vessel is in a tubular
    design with integrated guide plates, the
    process/barrier medium is directed
    through the shell of the HED and the
    cooling medium through the tubes.

The post IFE- HEAT EXCHANGERS appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/ife/feed/ 0 CGT 65 – BUFFER FLUID SYSTEMS http://elinarike.com/main/en/portfolio-items/cgt-65/ http://elinarike.com/main/en/portfolio-items/cgt-65/#respond Sun, 29 Dec 2019 16:37:06 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1737 CGT 65 - BUFFER FLUID SYSTEMS DOWNLOAD PDF For reducing barrier fluid pressure at standstill an automatic relief valve is provided Reversible double filter is provided for the fluid to pass through the oil cooler Level Switch with contact for minimum level Barrier fluid pressure can be controlled

The post CGT 65 – BUFFER FLUID SYSTEMS appeared first on شرکت الین اریکه.

]]>

CGT 65 – BUFFER FLUID SYSTEMS

  • CGT 65
  • CGT 65
DOWNLOAD PDF
  • For reducing barrier fluid pressure at
    standstill an automatic relief valve is
    provided
  • Reversible double filter is provided for the
    fluid to pass through the oil cooler
  • Level Switch with contact for minimum level
  • Barrier fluid pressure can be controlled
    manually
  • Maximum operating temperature in the tank
    to be maintained at 80 oC (return line
    maximum 90 oC)
  • For monitoring the pump discharge pressure
    (outside the circuit) an additional pressure
    connection is provided
  • Temperature monitoring is achieved by
    providing a return line and tank thermometer
  • For reducing barrier fluid pressure at
    standstill an automatic relief valve is
    provided
  • Reversible double filter is provided for the
    fluid to pass through the oil cooler
  • Level Switch with contact for minimum level
  • Barrier fluid pressure can be controlled
    manually
  • Maximum operating temperature in the tank
    to be maintained at 80 oC (return line
    maximum 90 oC)
  • For monitoring the pump discharge pressure
    (outside the circuit) an additional pressure
    connection is provided
  • Temperature monitoring is achieved by
    providing a return line and tank thermometer
  • Chemical industry
  • Oil and gas industry
  • Petrochemical industry
  • Refining technology
  • BFS range of barrier pressure units are
    designed to perform various functions of a
    barrier system which is essential for
    operating double seals (circulation and
    cooling of the barrier medium, pressurisation
    of the barrier fluid and compensation of
    leakage). The BFS systems are designed to
    operate with hydraulic oil having viscosity
    values ranging from 12 to 90 mm2/s under
    normal operating temperature of the
    equipment. The final selection of optimum
    viscosity of the oil to be used has to be
    ascertained independently in accordance
    with the respective operating parameters of
    the equipment

The post CGT 65 – BUFFER FLUID SYSTEMS appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/cgt-65/feed/ 0 CGT 64C – CLOSED LOOP SYSTEMS http://elinarike.com/main/en/portfolio-items/cgt-64c/ http://elinarike.com/main/en/portfolio-items/cgt-64c/#respond Sun, 29 Dec 2019 16:30:59 +0000 http://elinarike.com/main/?post_type=avada_portfolio&p=1732 CGT 64C - CLOSED LOOP SYSTEMS DOWNLOAD PDF Design construction available with finned tube, water or air coolers with fan Barrier pressure is created without any need for connection to a nitrogen supply Modular design combination available with a wide variety of system components and instruments selection possible

The post CGT 64C – CLOSED LOOP SYSTEMS appeared first on شرکت الین اریکه.

]]>

CGT 64C – CLOSED LOOP SYSTEMS

  • CGT 64C
  • CGT 64C
  • CGT 64C
DOWNLOAD PDF
  • Design construction available with
    finned tube, water or air coolers with fan
  • Barrier pressure is created without any
    need for connection to a nitrogen
    supply
  • Modular design combination available
    with a wide variety of system
    components and instruments selection
    possible
  • Pressurisation is achieved through a
    pre-loaded bladder accumulator
  • Nitrogen cannot get into the barrier
    medium or process medium, because it
    is separated from the barrier medium by
    membranes in the accumulator
  • The BFS is designed to perform the following
    functions of a barrier system:
  • To pressurize the barrier chamber
  • Leakage compensation
  • To cool the seal
  • Pressurization (> process pressure) prevents the
    process medium from getting into the barrier circuit or
    the atmosphere. Pressurization is supplied by a
    pressure accumulator which is pre-loaded with
    nitrogen. Circulation in the barrier circuit takes place by
    the thermosiphon principle or by forced circulation, e.g.
    with a pumping screw.
  • Operating and installation diagram for a CGT 64C.
    • A. From mechanical seal
    • B. To mechanical seal
    • C. Fill
    • F. Drain
    • G. Vent
    • H. N2 Precharge
  • Chemical industry
  • Oil and gas industry
  • Petrochemical industry
  • Refining technology
  • PED 2014/68/EU (Design and production in
    accordance with EU Pressure Equipment Directive)
  • ASME VIII, Div. 1 (Design, calculation and production)
  • Circulation in accordance with API 682 / ISO
    21049: Plan 53B
  • Pressurised barrier system (closed circuit) is
    employed for applications in sealing systems
    with operating parameters of high pressures
    and/or for hazardous/environmentally
    harmful processes. The BFS (Plan 53B)
    range is available with a pressure
    accumulator, cooler (finned tube or water or
    air cooler with fan) with a wide range of
    instruments.

The post CGT 64C – CLOSED LOOP SYSTEMS appeared first on شرکت الین اریکه.

]]> http://elinarike.com/main/en/portfolio-items/cgt-64c/feed/ 0